德國包裝標準(DIN packing standards)

德國包裝標準(DIN packing standards)

編號	中文名稱	英文名稱
DIN 10050-4-1973	奶油包裝材料的檢驗.耐疊層剝離性的測定	Testing of butter wrappers; determination of resistance against delamination
DIN 10050-7-1973	奶油包裝材料的檢驗.與奶油接觸的包裝材料表面水溶性成分的測定	Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter
DIN 10050-9-1973	奶油包裝材料的檢驗.透明性的測定	Testing of butter wrappers; determination of transmission
DIN 10082-1996	包裝材料.黃油卷包裝.交貨技術條件	Packaging - Butter wrappers - Technical delivery conditions
DIN 10259-1998	香煙過濾嘴,香煙和其它煙草製品包裝用材料.檸檬酸含量的測定	Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content
DIN 10370-1998	香煙過濾嘴,香煙和其它煙草製品包裝用材料.醋酸鹽含量的測定	Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
DIN 10519-2000	食品衛生.未包裝食物用的自助設備.衛生要求	Food hygiene - Self-service equipment for unpackaged food - Hygiene requirements
DIN 10522-2006	食品衛生.未包裝食品用可重複使用的盒子和容器的商業清潔.衛生要求、試驗	Food hygiene - Commercial cleaning of reusable boxes and reusable containers for unpackaged foodstuffs - Hygiene requirements, testing
DIN 10955-2004	感官分析.食品用包裝材料和包裝件的檢驗	Sensory analysis - Testing of packaging materials and packages for foodstuffs
DIN 15158-1-2005	包裝.物料運輸用託盤.第1部分:平託盤試驗的性能要求和選擇	Packaging - Pallets for materials handling - Part 1: Performance requirements and selection of tests for flat pallets
DIN 15158-2-2005	包裝.物料運輸用託盤.第2部分:工作載荷	Packaging - Pallets for materials handling - Part 2: Working load
DIN 16995-1992	包裝用薄膜.塑膠薄膜.性能和試驗方法	Films for packaging; plastic films; properties, testing
DIN 19302-2006	包裝材料.通用包裝紙.要求、試驗方法	Packaging materials - Paper for general packaging purposes - Requirements, test method
DIN 2003-2-1987	金屬包裝.非疊碼的圓柱形罐	Metal packages; canisters, cylindrical, non-stackable
DIN 2023-1-1998	金屬包裝.圓折邊蓋.尺寸.第1部分:尺寸、材料、標記	Metal packages - Ends for double seaming, round - Part 1: Dimensions, material, marking
DIN 2023-2-1998	金屬包裝.圓形雙重卷邊端部.第2部分:卡緊配合尺寸	Metal packages - Ends for double seaming, round - Part 2: Chuckfit gauges
DIN 2023-3-1998	金屬包裝.圓形雙重卷邊端部.第3部分:折邊咬合	Metal packages - Ends for double seaming, round - Part 3: Seaming chucks
DIN 2032-1987	金屬包裝.薄板金屬材料的加螺定封包	Metal packages; screwed closures of light gauge metal
DIN 24500-10-1971	軋製設備.第10部分:軋鋼機、包封設備、收集、捆紮裝、軋製材料捆紮包裝標識	Rolling mill equipment; rolling mills for steel, designations of equipment for wrapping, collecting, bundling, binding an packing of rolled material
DIN 25493-1997	核設施.防止金屬部件表面受到組裝工具、密封、裝璜、包裝材料和隔熱材料的損傷	Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials
DIN 32-3-1981	包裝.預包裝的包裝手段.第3部分:管道用盒量度的測定	Packaging; means of packaging for pre-packages; determination of measures for boxes for tubes
DIN 32-5-1983	包裝.預包裝貨物（快裝包裝）的包裝方法.粘膠包裝件的體積	Packaging; means of packaging for pre-packed-goods (ready packs); volume of packages made for adhesifs
DIN 45635-28-1980	機器空氣雜訊的測量.包絡面法.包裝和類似機器	Measurement of airborne noise emitted by machines; enveloping surface method; packaging and allied machinery
DIN 5059-1-1992	包裝.金屬和塑膠管.金屬管.管嘴、管肩	Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders
DIN 5059-2-1990	包裝.金屬和塑膠管.塑膠管.管嘴	Packaging; metal and plastic tubes; plastic tubes; tube nozzles
DIN 5060-1985	包裝材料.管端封口	Means of packaging; closures for tube ends
DIN 5065-1987	包裝.金屬及塑膠軟管用埠塑膠密封物	Packaging; plastic closures for metal and plastic tubes
DIN 5090-1997	包裝容器.包裝瓶	Means of packaging - Bottles for packaging
DIN 5097-1999	包裝輔助材料.瓶子夾塞	Auxiliary packaging means - Clipclocks for bottles
DIN 53757-1977	塑膠製品的檢驗.用長期堆垛試驗測定運輸和貯存包裝箱的性能	Testing of plastics articles; determination of the behaviour by stacking by long-time-test, boxes for transport and storage
DIN 55402-2-1982	包裝件裝運標記.出口商品包裝導則	Marking for shipping of packages; directive for export packaging
DIN 55405-2006	包裝.術語.術語和定義	Packaging - Terminology - Terms and definitions
DIN 55406-2007	包裝.聚乙烯或聚丙烯製作的單層或雙層28mm螺絲蓋和鋁制28mm保溫瓶的交貨、購買和使用特殊規範	Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)
DIN 55407-1-1995	包裝.一般交貨與供貨技術條件.第1部分:基本要素	Packaging - General technical terms of delivery and supply - Part 1: Basics
DIN 55407-2-1995	包裝.一般交貨與供貨技術條件.第2部分:誤差一覽表	Packaging - General technical terms of delivery and supply - Part 2: Catalogue of errors
DIN 55408-1-1978	包裝.技術規範與交貨條件.基礎	Packaging; technical specifications and delivery, basics
DIN 55412-1-1988	包裝.第1部分:按直線排放可裝 20 瓶啤灑(0.5 升型歐洲酒瓶)的 400 mm x 300 mm 塑膠制啤灑碼放箱	Packaging; 400 mm 300 mm plastic stacking crate, for 20 beer bottles (0,5 l Eurobottle), in linear arrangement
DIN 55412-2-1988	包裝.第2部分:按直線排放可裝 24 瓶啤灑(0.33 升型法國維希酒瓶)的 400 mm x 300 mm 塑膠制啤灑碼放箱	Packaging; 400 mm 300 mm plastic stacking crate, for 24 beer bottles (0,33 l Vichytype), in linear arrangement
DIN 55427-1983	包裝方法.塑膠箱.12瓶規格	Packaging means; plastic crates; 12 bottle size
DIN 55428-1-1998	包裝材料.硬質纖維板.第1部分:要求和試驗	Packaging materials - Solid fibreboard - Part 1: Requirements, testing
DIN 55428-2-1998	包裝材料.硬質纖維板.第2部分:濕強度.要求和試驗	Packaging materials - Solid fibreboard - Part 2: Wet strength; requirements, testing
DIN 55429-2-1987	包裝.紙板、硬纖維板或波紋板制箱子.尺寸、極限偏差、尺寸檢驗	Packaging; boxes manufactured from board, solid fibre-board or corrugated board; dimensions, limit deviations, testing of dimensions
DIN 55436-2-1990	包裝試驗.鋁管.管體變形性的測定	Packaging test; tubes made of aluminium; determination of the deformability of the tube body
DIN 55436-6-1985	包裝試驗.鋁制管.內外保護漆的粘合強度的配置	Packaging test; tubes made of aluminium; disposition of the adhesive strength of the inside and outside protective lacquer
DIN 55440-1-1991	包裝檢驗.壓緊檢驗.用恒定傳送速度檢驗	Packaging test; compression test; test with a constant conveyance-speed
DIN 55441-2-1998	包裝試驗.撞擊試驗.第2部分:塑膠瓶的自由落體試驗	Packaging test - Impact test - Part 2: Free drop of plastic bottles
DIN 55445-1-1985	包裝試驗.紙袋膠接縫耐久性的測定	Packaging test; determination of endurance of glue seams of papersacks
DIN 55445-2-1974	包裝試驗.塑膠袋縫口耐久性的測定	Packaging test; determination of endurance of seams of plasticsacks
DIN 55445-3-1974	包裝試驗.第3部分:口袋接縫耐久性測定.標圖法	Packaging test; determination of endurance of sack seams, plotting method
DIN 55446-1991	包裝.包裝和滿裝包裝件包裝的方法.抽樣	Packaging; means of packaging and complete filled transport packages; sampling
DIN 55450-1986	包裝.紙包裝袋.類型	Packaging; paper bags; types
DIN 55455-1986	包裝.紙制手提袋.類型	Packaging; paper carrier bags; types
DIN 55457-1-2000	包裝試驗.聚烯烴容器.抗應力開裂性.溫度程式	Packaging test - Containers made from polyolefines - Part 1: Tension cracking resistance; temperature procedure
DIN 55457-2 Bb.1-1986	包裝試驗.聚烯烴容器.用壓力溫度法檢驗抗應力裂紋性能.第2 Bb 1部分:試驗設備設計示例	Packaging test; containers made from polyolefins; stress cracking resistance, pressure-temperature method; examples for the design of test equipment
DIN 55457-2-2000	包裝試驗.聚烯烴容器.抗應力開裂性.第2部分:壓力溫度程式	Packaging test - Containers made from polyolefines - Part 2: Tension cracking resistance; pressure-temperature procedure
DIN 55461-2-1991	大型包裝材料.第2部分:柔性 IBC 尺寸	Large size packages; flexible IBC; dimensions
DIN 55465-2-1992	垃圾用紙或聚乙烯薄膜包裝材料.標稱容量50公升以下的袋子.形狀、尺寸、要求、檢驗	Packaging made from paper or polyethylene for waste; bags with a nominal capacity up to 50 l, shapes, dimensions, requirements, tests
DIN 55467-1987	包裝.裝箱單和檔用的保護蓋和扁平袋	Packaging; coverings and flat bags for packing lits and documents
DIN 55468-1-2004	包裝材料.波紋紙板.第1部分:要求、檢驗	Packaging materials - Corrugated board - Part 1: Requirements, testing
DIN 55468-2-2004	包裝材料.波紋紙板.第2部分:耐濕性、要求和檢驗	Packaging materials - Corrugated board - Part 2: Wet strength, requirements, testing
DIN 55471-1-1983	包裝用聚苯乙烯泡沫塑料.要求和檢驗	Cellular polystyrene for packaging; requirements and testing
DIN 55471-2-1987	包裝用聚苯乙烯泡沫塑料.模塑包裝材料的造型	Cellular polystyrene for packaging; design of moulded packaging
DIN 55473-2001	輔助包裝方法.乾燥劑袋.交貨技術條件	Auxiliary means of packaging - Desiccant in bag - Technical delivery conditions
DIN 55474-1997	包裝輔助材料.乾燥劑袋.應用、所需乾燥劑袋數的計算	Auxiliary means of packaging - Desiccants in bag - Application, calculation of the required number of desiccant units
DIN 55475-1997	包裝輔助材料.牛皮紙制粘合帶.未增強和增強可水活化或熱活化.要求和試驗	Auxiliary means of packaging - Tapes from kraftpaper - Not reinforced or reinforced, water or heat activatable; requirements and testing
DIN 55477-1990	包裝.非增強和增強的塑膠帶.要求和試驗	Packaging; non-reinforced and reinforced plastic tapes; requirements and testing
DIN 55479-2000	包裝.用壓敏膠粘帶和膠紙帶密封紙板盒和包裝箱的種類	Packaging - Types of sealings of cartons and boxes by means of pressure-sensitive adhesive tape and gummed paper tape
DIN 55480-1976	包裝方法.帶螺旋蓋的鋁制圓罐	Means of packaging; cans made of aluminium with screw caps, round
DIN 55481-1-1987	包裝用聚乙烯泡沫塑料.要求、試驗	Cellular polyethylene for packaging; requirements, tests
DIN 55482-1-1989	包裝用聚亞氨酯泡沫塑料.第1部分:要求、檢驗	Cellular polyurethane for use in packaging; requirements and testing
DIN 55483-1-1984	包裝用橡膠纖維和/或動物纖維.第1部分:要求、檢驗	Rubberized fibre and/or hair for packaging; requirements, testing
DIN 55505-1973	氣溶膠包裝.蓋座高度	Aerosol packages; cover seat height
DIN 55507-1976	氣溶膠包裝.彎釘固定工具的工作面	Aerosol package; work parts of tools for clinching
DIN 55510-1-2005	包裝.包裝區的尺寸協調.第1部分:原則	Packaging - Dimensional coordination in the field of packaging - Part 1: Principles
DIN 55510-2-2005	包裝.包裝區的尺寸協調.第2部分:術語	Packaging - Dimensional coordination in the field of packaging - Part 2: Terminology
DIN 55510-3-2005	包裝.包裝區的尺寸協調.第3部分:規則和尺寸	Packaging - Dimensional coordination in the field of packaging - Part 3: Rules and dimensions
DIN 55511-1-1984	包裝方法.可調整到600mm×400mm、用硬纖維板和波紋板製成的包裝箱.帶底和折板頂蓋的可折疊箱	Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); folding boxes with bottom and top flaps
DIN 55511-3-1984	包裝方法.可調整到600mm×400mm、用硬纖維板和波紋板製成的包裝箱.伸縮式包裝箱	Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); telescope boxes
DIN 55512-7-1981	包裝.單件包裝.第7部分:紙、繕寫用品的量度標準	Packaging; unit packs; paper, writing materials; measures
DIN 55520-1985	貨運包裝的配置面積.從800mm×1200mm和1000mm×1200mm的配置面積進行的推算	Position areas for shipping packages, derived from the position areas 800 mm × 1200 mm and 1000 mm × 1200 mm
DIN 55522-1987	包裝.紙板箱.帶插入底板和插入蓋的折疊紙板箱.紙箱尺寸的確定	Packaging; cartons made of cartonboard; cartons with tuck-in base and lid; determination of the dimensions of cartons
DIN 55524-1-2005	包裝.分裝盒.第1部分:瓦楞紙板製作的包裝用分裝盒	Packaging - Attributes - Part 1: Attributes for packaging made of corrugated fibreboard
DIN 55524-2-2005	包裝.分裝盒.第2部分:實芯紙板製作的包裝用分裝盒	Packaging - Attributes - Part 2: Attributes for packaging made of solid board
DIN 55526-1-1991	包裝試驗.壓縮試驗.標稱容積10升以下的塑膠容器的動態試驗	Packaging test; compression test; dynamical test for plastic containers, with a capacity up to 10 liters
DIN 55529-2005	包裝.測定軟包裝材料制密封件的密封接縫強度	Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
DIN 55530-1987	包裝用塑膠薄膜.低密度聚乙烯隔擋材料	Plastic films for packaging; barrier materials made of low density polyethylene
DIN 55531-1988	包裝用金屬箔.疊層鋁箔	Foils for packaging; laminated aluminium foils
DIN 55533-2005	包裝材料試驗.用有示蹤氣體的撓性試驗室對薄膜或箔制包裝材料的洩漏性進行的完整檢驗法	Packaging testing - Integral test method for packagings made of films or foils for leakage using a flexible test chamber with tracer gas
DIN 55534-2006	用水作為試驗媒介通過頂部空間從包裝和包裝材料上味覺遷移的試驗	Testing of taste transfer from packages and packaging materials through the head space using water as the test medium
DIN 55540-1 Bb.1-1979	包裝的檢驗.預包裝充滿率的測定.包裝材料密度和粘合劑及類似產品包裝的變化係數表格	Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN 55540-1 Bb.2-1980	包裝檢驗.預包裝充滿率的規定.產品密度和植物防護產品及類似產品包裝的變化係數表格	Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for plants protection products and similar products
DIN 55540-1 Bb.3-1988	包裝檢驗.預包裝件裝滿率的規定.洗滌、清潔及類似製品的包裝密度變數係數的表格	Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for washing and cleaning products and similar products
DIN 55540-1 Bb.4-1980	包裝試驗.預包裝充滿率的規定.產品密度和清洗產品包裝變化係數表格	Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for cleaning products
DIN 55540-1-1978	包裝檢驗.第1部分:標準容量預包裝填充率的測定.預包裝物品按重量標注	Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight
DIN 55542-2-1985	包裝試驗.包裝容器容積的測定.圓筒形管	Packaging test; determination of capacity for means of packaging, cylindrical tubes
DIN 55542-4-1990	包裝試驗.錐形管包裝容量的測定.錐形管	Packaging test; determination of capacity for packages, conical tubes
DIN 55543-1-1986	包裝試驗.塑膠袋試驗方法.薄膜厚度的測定	Packaging test; test methods for plastic sacks; determination of the film thickness
DIN 55543-2-1984	包裝試驗.塑膠袋試驗方法.膠接縫抗剝離性的測定	Packaging test; test methods for plastic sacks; determination of the peel resistance of glued seams
DIN 55543-3-1985	包裝檢驗.塑膠袋試驗方法.縱向接縫強度的測定	Testing of packaging; methods of test for plastic sacks; determination of the strenght of longitudinal seams
DIN 55543-4-1985	包裝檢驗.塑膠袋試驗方法.第4部分:聚乙烯薄膜皺縮的測定	Testing of packaging; methods of test for plastic sacks; determination of the shrinkage of polyethylene films
DIN 55545-1-2006	包裝.絕緣性能的包裝.第1部分:初始評價試驗	Packaging - Packaging with insulating properties - Part 1: Initial evaluation testing
DIN 55560-1-1988	可再封閉的防兒童打開的包裝.帶壓力/轉動系統(軸向壓力作用)的塑膠螺旋罩.特技系統的機械檢驗	Reclosable child resistant packages; plastic screw closures with press/turn system (axial pressure effect); mechanical testing of trick system
DIN 58952-2-1977	消毒.第2部分:消毒物品、金屬制筐用包裝材料	Sterilization; packing materials for sterilizing goods, sterilizing baskets made of metal
DIN 58952-3-1977	消毒.第3部分:消毒物品、金屬制儀器託盤用包裝材料	Sterilization; packing materials for sterilizing goods, instrument trays made of metal
DIN 58953-7-2003	消毒.消毒材料供應.第7部分:消毒紙、非織造的包裝材料、紙袋、耐熱和自密封袋和紙帶盤的使用	Sterilization - Sterile supply - Part 7: Use of sterilization paper, nonwoven wrapping material, paper bags and heat and self-sealable pouches and reels
DIN 6075-1-1997	包裝材料.瓶.第1部分:維希型1	Means of packaging - Bottles - Part 1: Vichy-shape 1
DIN 6075-2-2000	包裝方法.瓶.第2部分:維希(Vichy)型2	Means of packaging - Bottles - Part 2: Vichy-shape 2
DIN 6094-10-1998	包裝.廣口玻璃瓶瓶塞.第10部分:翻邊瓶塞	Means of packaging - Finishes for wide-mouthed glass containers - Part 10: Beaded edge finishes
DIN 6094-12-1995	包裝.瓶口.第12部分:帶內壓的 7.5 R 螺旋瓶口	Packaging - Finishes for bottles - Part 12: Screw thread 7,5 R for bottles with internal pressure
DIN 6094-13-1997	包裝材料.瓶塞.第13部分:2道和3道螺紋瓶塞	Means of packaging - Finishes - Part 13: 2 thread- and 3 thread-screw-finishes
DIN 6094-14-1995	包裝.瓶口.第14部分:帶內壓的 8 G 螺旋瓶口	Packaging - Finishes for bottles - Part 14: 8 G screw-thread for bottles with internal pressure
DIN 6094-3-2003	包裝方法.瓶口.第3部分:適用於拉起式瓶塞的瓶口	Means of packaging - Finishes - Part 3: Finish for lever stoppers
DIN 6094-5-2000	包裝材料.瓶塞.第5部分:汽酒瓶用塑膠瓶塞、軟木塞和冠狀軟木塞	Packaging - Finishes - Part 5: Finishes for sparkling wine bottles with plastics and cork stoppers and crown corks
DIN 6094-7-1995	包裝.瓶口.第7部分:防盜酒瓶口	Packaging - Finishes for bottles - Part 7: Pilferprooffinishes
DIN 6094-8-1997	包裝材料.瓶塞.第8部分:外螺紋	Means of packaging - Finishes - Part 8: With external screw thread
DIN 6096-1998	包裝材料.0,75升的裝發泡酒的酒瓶	Packaging - 0,75 l bottles for sparkling wines
DIN 6099-1997	包裝材料.冠狀軟木塞	Packaging - Crown corks
DIN 6103-2002	包裝材料.圓柱形塑膠軟管.同軸多層管.尺寸、材料	Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials
DIN 6110-2000	包裝方法.標稱容量212ml、425ml、580ml和720ml的可重複使用的廣口瓶	Means of packaging - Reusable jars with a nominal capacity of 212 ml, 425 ml, 580 ml, 720 ml
DIN 6111-2002	包裝.高壓包裝件.帶不可拆卸分配裝置的可重複使用的高壓包裝件	Packaging - High-pressure packages - Reusable, with non-removable dispensing facility
DIN 6112-2002	包裝.輕型金屬測量容器.插入式REL塑封閉裝置的孔徑	Packaging - Light gauge metal containers - Aperture for plug-in REL plastic closures
DIN 6120-1-1996	可回收使用的包裝盒和包裝材料標誌.塑膠包裝盒和包裝材料.第1部分:圖形符號	Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 1: Graphical symbols
DIN 6120-2-1996	可回收使用的包裝盒和包裝材料標誌.塑膠包裝盒和包裝材料.第2部分:附加標誌	Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 2: Supplementary marking
DIN 6121-1996	包裝材料.計量容器標記	Packaging - Marking of measuring containers
DIN 6128-2001	包裝方法.化妝品用玻璃容器.通用公差	Means of packaging - Glass containers for cosmetic products - General tolerances
DIN 6129-1-1997	包裝方法.玻璃瓶和玻璃罐.第1部分:自動化生產的瓶子的通用公差	Means of packaging - Bottles and hollow-ware from glass - Part 1: General tolerances for automatic produced bottles
DIN 6129-2-1999	包裝方法.玻璃瓶和玻璃凹形器皿.第2部分;容量	Means of packaging - Bottles and hollow-ware from glass - Part 2: Volumes
DIN 6130-1980	包裝方法.塑膠瓶和空心體.重量和充滿量的一般公差	Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume
DIN 6141-2000	包裝材料.纖維板帶蓋桶.鋼制的底和蓋	Packaging - Fibreboard drums - Bottom and lid made of steel
DIN 61750-1977	紡織品貨運包裝箱的基本尺寸	Base sizes of shipping containers for textiles
DIN 61751-2-1967	第2部分:紡織品、針織男襪和童襪、針織緊身襪褲零售包裝尺寸(長 x 寬)	Sizes (width by length) of retail packages of textiles, knitted socks for men and children, knitted tights
DIN 61752-7-1974	紡織品零售包裝尺寸(長 x 寬).第7部分:毛毯和旅行毯	Sizes (width by length) for retail packages of textiles; blankets and travelling-rugs
DIN 6193-1980	包裝材料.德國式標準3型瓶	Means of packaging; bottles, german shape standard III
DIN 6198-1988	包裝.瓶.歐洲2型	Packaging; bottles; Euro 2
DIN 6318-2002	卡箍用步進式包裝塊支座	Stepped packing blocks as support for clamps
DIN 6634-1976	包裝方法.圓桶用軋製工字鋼.尺寸	Means of Packaging; Rolled I-steel for Drums; Dimensions
DIN 6644-2-1987	包裝材料.鋼制鼓形包裝容器.帶柄鎖緊環	Packaging; steel drums; clamping rings with lever
DIN 6644-4-1987	包裝材料.帶波形卷邊、可堆垛、帶可拆蓋的鋼制鼓形包裝容器	Packaging; steel drums with full removable head, stackable, with wave beads
DIN 6646-2001	包裝方法.鋼制非移動蓋和移動蓋式鼓形桶.跌落處理	Means of packaging - Non-removable head (tight head) and removable head (open head) drums made of steel - Drop handle
DIN 6647-1-2006	包裝形式.筒裝飲料容器.第1部分:允許工作壓力小於3巴、標稱容量小於50立升	Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 3 bar, nominal volume up to 50 litres
DIN 6647-2-2006	包裝形式.筒裝飲料容器.第2部分:允許工作壓力小於7巴、標稱容量小於50立升	Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 7 bar, nominal volume up to 50 litres
DIN 6647-3-2003	包裝材料.圓柱形飲料桶.第3部分:允許工作壓力不超過3巴、標稱容量大於100升	Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres
DIN 6647-4-2004	包裝手段.圓柱形飲料包裝盒.第4部分:允許工作壓力3巴及以下、標稱容量60升及以下的不回收包裝	Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres
DIN 68255-1979	鋸材運輸包裝	Sawn timber transportation packages
DIN 7274-1-1981	包裝.額定容積為5、10和20升的鋼制油桶.尺寸	Packaging; Steel canisters with nominal volumes of 5, 10 and 20 l; Dimensions
DIN 7274-2-1981	包裝材料.公稱容積為5、10 和 20升的鋼制油桶.安全性要求和試驗	Packaging; Steel canisters with nominal volumes of 5, 10 and 20 l; Safety requirements and testing
DIN 8743-2004	包裝機械和包裝線.時間術語、參數和計算基礎	Packaging machines and packaging lines - Terms of time, parameters and basics of calculation
DIN 8782-1984	飲料包裝技術.與灌裝設備及組成機器有關的術語	Beverage packaging technology; terminology associated with filling plants and their constituent machines
DIN 8784-1993	飲料灌裝和包裝技術.基本的與定貨有關的設備規範	Beverage filling and packaging technology; minimum and order related machine specification
DIN CEN/TS 14014-2006	郵政業務.混合郵件業務.自動郵件處理信件包裝的XML定義	Postal services - Hybrid Mail - XML definition of encapsulation of letters for automated postal handling; English version CEN/TS 14014:2006
DIN CEN/TS 14631-2005	郵政服務.容器和包裝物的自動鑒別.容器資產編號	Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering; German version CEN/TS 14631:2005
DIN EN 10333-2005	包裝用鋼.與人和動物用食品、產品和飲料接觸的扁平鋼製品.鍍錫鋼	Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate); German version EN 10333:2005
DIN EN 10334-2005	包裝用鋼.與人和動物用食品、產品和飲料接觸的扁平鋼製品.無塗覆鋼(黑鋼板)	Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate); German version EN 10334:2005
DIN EN 10335-2005	包裝用鋼.與人和動物用食品、產品和飲料接觸的扁平鋼製品.非合金電解鉻/氧化鉻鍍鋼	Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; German version EN 10335:2005
DIN EN 1086-1995	食品保護運輸袋.袋型選擇和涉及包裝物的內袋的建議; 德文版本 EN 1086:1995	Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed; German version EN 1086:1995
DIN EN 12245-2002	可運輸式儲氣瓶.全包裝合成氣瓶; 德文版本 EN 12245:2002	Transportable gas cylinders - Fully wrapped composite gas cylinders; German version EN 12245:2002
DIN EN 12246-1999	託盤和包裝用木材的品質分類	Quality classification of timber used in pallets and packaging; German version EN 12246:1999
DIN EN 12248-1999	工業包裝用鋸切木料.允許偏差和優選尺寸	Sawn timber used in industrial packaging - Permitted deviations and preferential sizes; German version EN 12248:1999
DIN EN 12257-2002	可運輸式儲氣瓶.無縫、環形包裝合成氣瓶; 德文版本 EN 12257:2002	Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders; German version EN 12257:2002
DIN EN 12374-1998	包裝材料.柔性管材.專業術語	Packaging - Flexible tubes - Terminology; German version EN 12374:1998
DIN EN 12375-1998	包裝.鋁軟管.管壁厚度的測定方法	Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998
DIN EN 12377-1998	包裝材料.軟管材.封閉體的氣密性試驗方法	Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998
DIN EN 12546-3-2000	與食品接觸的材料和物品.家用保溫容器.第3部分:熱包裝規範	Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; German version EN 12546-3:2000
DIN EN 12702-2000	紙、紙板和包裝用及一次性衛生產品用膠粘劑.潛在粘結層成塊特性的測定.德文版本EN 12702:2000	Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers; German version EN 12702:2000
DIN EN 12703-1999	紙、紙板和包裝用及一次性衛生製品用膠粘劑.低溫柔性和冷脆性的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature; German version EN 12703:1999
DIN EN 12704-2000	紙、紙板和包裝用及一次性衛生產品用膠粘劑.含水膠粘劑起泡性能的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation of aqueous adhesives; German version EN 12704:1999
DIN EN 12726-2000	包裝.軟木塞和塞蓋用口徑為18.5mm的軟木塞瓶口部光度	Packaging - Cork mouth finish with a bore diatmeter of 18,5 mm for corks and tamper evident capsules; German version EN 12726:2000
DIN EN 12960 Berichtigung 1-2007	紙和紙板、包裝和一次性衛生用品用膠粘劑.耐剪切性的測定.技術勘誤DIN EN 12960-2001	Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; German version EN 12960:2001, Corrigenda to DIN EN 12960:2001-06; German version EN 12960:2001/AC:2007
DIN EN 12960-2001	紙和紙板、包裝和一次性衛生用品用膠粘劑.耐剪切性測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; German version EN 12960:2001
DIN EN 13010 Berichtigung 1-2007	包裝.單件包裝.標記板顯示的尺寸和要求	Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003, Corrigenda to DIN EN 13010:2003-06
DIN EN 13010-2003	包裝.單元包裝.硬質纖維板顯示的尺寸和要求	Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003
DIN EN 13025-1-2006	包裝.輕型金屬容器.第1部分:最大容量40000ml的通用圓形、圓柱形和圓錐形金屬容器的標稱填裝容積	Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; German version EN 13025-1:2005
DIN EN 13025-2-2006	包裝.輕型金屬容器.第2部分:20000ml、25000ml和30000ml標稱容量的固定蓋(緊蓋)圓鋼和馬口鐵容器	Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-2:2005
DIN EN 13025-3-2006	包裝.輕型金屬容器.第3部分:20000ml、25000ml和30000ml標稱容量可移動蓋(活蓋)圓鋼和馬口鐵容器	Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-3:2005
DIN EN 13026-2001	包裝.小型金屬包裝.標稱灌注容量不超過30000ml的錐形、圓柱形和非圓形普通金屬容器	Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml; German version EN 13026:2001
DIN EN 13027-2001	包裝.小型金屬包裝.根據標稱總裝蓋容量定義的頂開口圓形罐	Packaging - Light-gauge metal packaging - Open top round cans defined by their nominal gross-lidded capacity; German version EN 13027:2001
DIN EN 13028-2001	包裝.輕型金屬包裝.由公稱裝填容量限定的加氣體飲料用頂開口圓形罐; 德文版本 EN 13028:2001	Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes; German version EN 13028:2001
DIN EN 13029-2001	包裝.薄金屬包裝.插入式塑膠封閉套的孔徑	Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures; German version EN 13029:2001
DIN EN 13045-2000	包裝.圓柱形塑膠軟管.尺寸和公差	Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000
DIN EN 13046-2000	包裝.圓柱形金屬軟管.尺寸和公差	Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000
DIN EN 13047-2000	包裝.圓錐形金屬軟管.尺寸和公差	Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000
DIN EN 13048-2000	包裝.鋁軟管.內部清漆薄膜厚度測量方法	Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000
DIN EN 13054-2001	包裝.完全和滿載運輸包裝件.包裝件重心測定方法	Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package; German version EN 13054:2001
DIN EN 13117-1-2000	運輸包裝.可重複使用硬塑膠配送箱.第1部分:通用配送箱	Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application; German version EN 13117-1:2000
DIN EN 13117-2-2000	運輸包裝.可重複使用的硬塑膠配送箱.第2部分:試驗的通用規範	Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing; German version EN 13117-2:2000
DIN EN 13193-2000	包裝.包裝和環境.術語	Packaging - Packaging and environment - Terminology; German version EN 13193:2000
DIN EN 13199-1-2000	包裝.小型貨物的載運系統.第1部分:通用要求和試驗方法	Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods; German version EN 13199-1:2000
DIN EN 13199-2-2000	包裝.小型貨物的載運系統.第2部分:柱形堆朵法	Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS); German version EN 13199-2:2000
DIN EN 13199-3-2000	包裝.低負重載運系統.第3部分:聯結式疊架	Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS); German version EN 13199-3:2000
DIN EN 13246-2001	包裝.捆綁鋼帶規範	Packaging - Specification for tensional steel strapping; German version EN 13246:2001
DIN EN 13247-2001	包裝.道路安全繩索升降梯捆綁鋼帶規範	Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads; German version EN 13247:2001
DIN EN 13393-2001	包裝.邊角保護器規範	Packaging - Specification for edge protectors; German version EN 13393:2001
DIN EN 13394-2001	包裝.非金屬拉伸箍帶規範; 德文版本 EN 13394:2001	Packaging - Specification for non-metallic tensional strapping; German version EN 13394:2001
DIN EN 13427-2004	包裝.歐洲標準在包裝和包裝廢棄物領域的使用要求	Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste; German version EN 13427:2004
DIN EN 13428-2004	包裝.製造和組成的特定要求.資源減少的防止	Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction; German version EN 13428:2004
DIN EN 13429-2004	包裝.重新使用	Packaging - Reuse; German version EN 13429:2004
DIN EN 13430-2004	包裝.通過材料再迴圈評定包裝可回收性的要求	Packaging - Requirements for packaging recoverable by material recycling; German version EN 13430:2004
DIN EN 13431-2004	包裝.以能量恢復的形式評定包裝可回收性的要求(包括最小次熱值規範)	Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value; German version EN 13431:2004
DIN EN 13432 Berichtigung 2-2007	包裝.通過合成和生物降解評定包裝可回收性的要求.包裝最後驗收的試驗計畫和評估標準.技術勘誤DIN EN 13432-	Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000, Corrigenda to DIN EN 13432:2000-12, German version EN 13432:2000/AC:2005
DIN EN 13432-2000	包裝.通過合成和生物降解評定包裝可回收性的要求.試驗計畫和包裝最後驗收標準的評定	Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000
DIN EN 13437-2004	包裝和材料回收.回收方法的標準.回收過程和流程圖的描述	Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart; German version EN 13437:2003
DIN EN 13439-2004	包裝.能量回收率.定義和計算方法	Packaging - Rate of energy recovery - Definition and method of calculation; German version EN 13439:2003
DIN EN 13440-2004	包裝.回收率.定義和計算方法	Packaging - Rate of recycling - Definition and method of calculation; German version EN 13440:2003
DIN EN 13461-2001	包裝.圓柱形層壓軟管.尺寸和公差	Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001
DIN EN 13538-3-2002	睡袋尺寸特性測定.第3部分:有效容積和易包裝性; 德文版本 EN 13538-3:2002	Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packaging; German version EN 13538-3:2002
DIN EN 13590-2003	包裝.各種零售商品運輸用軟包裝袋.通用特性及容積和載重量測定的試驗方法	Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity; German version EN 13590:2003
DIN EN 13593-2003	包裝.家用廢棄物收集紙袋.類型、要求和試驗方法	Packaging - Paper sacks for household waste collection - Types, requirements and test methods; German version EN 13593:2003
DIN EN 13626-2003	包裝.箱式託盤.一般要求和試驗方法	Packaging - Box pallets - General requirements and test methods; German version EN 13626:2003
DIN EN 13628-1-2003	包裝.軟包裝材料.用靜態氣相色譜法測定剩餘溶劑.第1部分:絕對法	Packaging; Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods; German version EN 13628-1:2002
DIN EN 13628-2-2003	包裝.軟包裝材料.用靜態氣相色譜法測定剩餘溶劑.第2部分:工業法	Packaging; Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods; German version EN 13628-2:2002
DIN EN 13920-14-2003	鋁和鋁合金.廢料.第14部分:舊的鋁制包裝件廢料	Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings; German version EN 13920-14:2003
DIN EN 13920-15-2003	鋁和鋁合金.廢料.第15部分:去除塗層的用過的鋁包裝物廢料	Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings; German version EN 13920-15:2003
DIN EN 14045-2003	包裝.在規定了合成條件的實際定向試驗中包裝材料分解的評價	Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions; German version EN 14045:2003
DIN EN 14046-2003	包裝.組成條件受控的包裝材料最大需氧生物降解能力的評價.二氧化碳釋放分析的方法	Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide; German version EN 14046:2003
DIN EN 14047-2003	包裝.含水介質中包裝材料最終氧化生物降解性測定.二氧化碳分析法	Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide; German version EN 14047:2002
DIN EN 14048-2003	包裝.含水介質中包裝材料最終氧化生物降解性測定.封閉式呼吸機需氧量測量法	Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer; German version EN 14048:2002
DIN EN 14053-2003	包裝.波紋板或實心纖維紙板製成的包裝件	Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction; German version EN 14053:2003
DIN EN 14054-2003	包裝.紙和紙板包裝.紙板箱的設計	Packaging - Paper and paperboard packaging - Design of cartons; German version EN 14054:2003
DIN EN 14149-2003	包裝.完全滿運輸包裝件和成組貨件.旋轉下落的衝擊試驗	Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop; German version EN 14149:2003
DIN EN 14182-2003	包裝.術語.基本術語和定義	Packaging - Terminology - Basic terms and definitions; German version EN 14182:2002
DIN EN 14287-2004	鋁和鋁合金.生產包裝和包裝元件用產品的化學組分的特定要求	Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components; German version EN 14287:2004
DIN EN 14375 Berichtigung 1-2006	製藥產品用兒童不可重新封蓋的藥品包裝法.要求和試驗.對DIN EN 114375-2004的勘誤	Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; German version EN 14375:2003, Corrigenda to DIN EN 14375:2004-02; German version EN 14375:2003/AC:2006
DIN EN 14375-2004	保護兒童的不可重封口的藥品包裝.要求及試驗	Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; German version EN 14375:2003
DIN EN 14391-2004	包裝.可折疊鋁管.危險的觸摸警告	Packaging - Collapsible aluminium tubes - Tactile warnings of danger; German version EN 14391:2004
DIN EN 14477-2004	柔性包裝材料.抗穿透性測定.試驗方法	Packaging, Flexible packaging material - Determination of puncture resistance - Test methods; German version EN 14477:2004
DIN EN 14479-2004	柔性包裝材料.動態液上氣相色譜法測定殘留溶劑.絕對測定法	Packaging, Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method; German version EN 14479:2004
DIN EN 14634-2005	玻璃包裝.26 H 180冠形蓋瓶口.尺寸	Glass packaging - 26 H 180 crown finish - Dimensions; German version EN 14634:2004
DIN EN 14635-2005	玻璃包裝.26 H 126冠形蓋瓶口.尺寸	Glass packaging - 26 H 126 crown finish - Dimensions; German version EN 14635:2004
DIN EN 14713-2006	紙和紙板、包裝和一次性清潔產品用膠粘劑.可能適合粘結的薄膜的摩擦性能測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding; German version EN 14713:2005
DIN EN 14798-2006	玻璃包裝.手動冠形開瓶器.尺寸	Glass packaging - Hand-held crown bottle openers - Dimensions; German version EN 14798:2005
DIN EN 14806-2005	包裝.在實驗室試驗中模擬堆肥條件下初步評價包裝材料的分解	Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test; German version EN 14806:2005
DIN EN 14866-2006	釉瓷和搪瓷.空氣與氣體、氣體與氣體熱交換器用蓄熱、上釉和包裝的板材.規範	Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications; German version EN 14866:2005
DIN EN 14867-2005	包裝.塑膠冰凍袋.規範和試驗方法	Packaging - Plastic freezer bags - Specifications and test methods; German version EN 14867:2005
DIN EN 14887-2006	玻璃包裝.開啟軟木塞設備.一般要求	Glass packaging - Cork removal devices - General requirements; German version EN 14887:2005
DIN EN 14932-2007	塑膠.包裝帶用伸縮性熱塑薄膜.要求和試驗方法	Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods; English version of DIN EN 14932:2007-03
DIN EN 14979-2006	包裝.軟塑膠/金屬層壓管.S13噴嘴的尺寸和公差	Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 English version of DIN EN 14979:2006-05
DIN EN 15208-2007	危險物品的運輸罐.密封包裝運輸系統.工作原理和介面規範	Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications; German version EN 15208:2007
DIN EN 15385-2007	包裝.柔性疊層管.測定頭部焊接強度的試驗方法	Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding; German version EN 15385:2007
DIN EN 1719-1998	紙張和制板、包裝材料和衛生製品的粘結劑.壓敏性粘接材料粘性的測量.用環釘法測定粘性	Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack; German version EN 1719:1998
DIN EN 1720-1998	紙張和紙板、包裝材料和衛生製品的粘結劑.可分散性的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability; German version EN 1720:1998
DIN EN 1721-1998	紙張和紙板、包裝材料和衛生產品的粘結劑.壓敏性粘接劑表面粘性的測量.按照滾球法測量表面粘性	Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack; German version EN 1721:1998
DIN EN 1895 Berichtigung 1-2007	包裝和一次性衛生製品用紙和紙板膠粘劑.柔性組裝的180°"T"型剝離試驗.技術勘誤DIN EN 1895-2002	Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" Peel test for a flexible-to-flexible assembly; German version EN 1895:2001, Corrigenda to DIN EN 1895:2002-02; German version EN 1895:2001/AC:2007
DIN EN 1895-2002	包裝和一次性衛生製品用紙和紙板膠粘劑.柔性組裝的180°"T"型剝離試驗	Adhesives for paper and board, packaging and disposable sanitary products - 180° "T" peel test for a flexible-to-flexible assembly; German version EN 1895:2001
DIN EN 1896-2001	紙、紙板、包裝和一次性衛生用品用粘結劑.拉伸和抗拉強度的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001
DIN EN 22206-1993	包裝.滿裝的運輸包裝.試驗時包裝零件的標識	Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987); german version EN 22206:1992
DIN EN 22248-1993	包裝.滿裝的運輸包裝.墜落垂直衝擊試驗	Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992
DIN EN 22876-1993	包裝.滿裝的運輸包裝.滾動試驗	Packaging; complete, filled transport packages; rolling test (ISO 2876:1985); german version EN 22876:1992
DIN EN 23-1-1978	粉狀洗滌劑和清潔劑的包裝.紙板盒和圓筒的尺寸和容量	Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board
DIN EN 24178-1993	滿裝的運輸包裝.分配嘗試.要記錄的資訊	Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980); german version EN 24178:1992
DIN EN 24180-1-1993	滿裝的運輸包裝.性能試驗計畫編制的一般規則.第1部分:概述	Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980); german version EN 24180-1:1992
DIN EN 24180-2-1993	滿裝的運輸包裝.性能試驗計畫編制的一般規則.第2部分:定量參數	Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980); german version EN 24180-2:1992
DIN EN 26590-1-1993	包裝.包裝袋.術語和類型.第1部分:紙袋	Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983); german version EN 26590-1:1992
DIN EN 26590-2-1993	包裝.包裝袋.術語和類型.第2部分:熱塑性塑膠柔性薄膜袋	Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986); german version EN 26590-2:1992
DIN EN 26591-1-1993	包裝.包裝袋.說明和測量方法.第1部分:空紙袋	Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984); german version EN 26591-1:1992
DIN EN 26591-2-1993	包裝.包裝袋.說明及測量方法.第2部分:熱塑柔性薄膜空袋	Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985); german version EN 26591-2:1992
DIN EN 26599-1-1993	包裝.包裝袋.試驗條件.第1部分:紙袋	Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983); german version EN 26599-1:1992
DIN EN 27023-1993	包裝.包裝麻袋.試驗用空麻袋的取樣方法	Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983); german version EN 27023:1992
DIN EN 27965-1-1993	包裝.包裝袋.跌落試驗.第1部分:紙袋	Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984); german version EN 27965-1:1992
DIN EN 28474-1993	包裝.滿裝的運輸包裝.浸水試驗	Packaging; Complete, filled transport packages; water immersion test (ISO 8474:1986); german version EN 28474:1992
DIN EN 28768-1993	包裝.滿裝的運輸包裝.翻倒試驗	Packaging; complete, filled transport packages; toppling test (ISO 8768:1986); german version EN 28768:1992
DIN EN 29454-1-1994	軟釺焊劑.分類和要求.第1部分:分類、標記和包裝	Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990); German version EN 29454-1:1993
DIN EN 3475-510-2002	航空航太系列.航空用電纜.試驗方法.第510部分:擠壓絕緣護套和包裝材料的抗拉強度和延伸率; 德文和英文版本	Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002
DIN EN 365 Berichtigung 1-2007	防人員從高處墜落的保護裝置.使用說明、維修、週期檢驗、修理、標記和包裝的一般要求	Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging; German version EN 365:2004, Corrigenda to DIN EN 365:2004-12; German version EN 365:2004/AC:2006
DIN EN 365-2004	防人員從高處墜落的保護裝置.使用說明、維修、週期檢驗、修理、標記和包裝的一般要求	Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging; German version EN 365:2004
DIN EN 415-1-2000	包裝機械的安全性.第1部分:包裝機械和相關設備的術語和分類	Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment; German version EN 415-1:2000
DIN EN 415-2-2000	包裝機械的安全性.第2部分:預成形剛性容器包裝機	Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; German version EN 415-2:1999
DIN EN 415-3-2000	包裝機械的安全性.第3部分:成型,裝填和密封機	Safety of packaging machines - Part 3: Form, fill and seal machines; German version EN 415-3:1999
DIN EN 415-4-1997	包裝機械安全性.第4部分:碼垛機和散垛機	Safety of packaging machines - Part 4: Palletisers and depalletisers; German version EN 415-4:1997
DIN EN 415-5-2006	包裝機械的安全性.第5部分:打包機	Safety of packaging machines - Part 5: Wrapping machines; English version of DIN EN 415-5:2006-10
DIN EN 415-6-2007	包裝機械的安全性.第6部分:託盤包裝機械	Safety of packaging machines - Part 6: Pallet wrapping machines; German version EN 415-6:2006
DIN EN 415-7-2006	包裝機械的安全性.第7部分:組別和二次包裝機械	Safety of packaging machines - Part 7: Group and secondary packaging machines; English version of DIN EN 415-7:2006-10
DIN EN 60191-6-3-2001	半導體裝置的機械標準化.第6-3部分:表面安裝的半導體裝置包裝外廓圖繪製一般規則.包裝尺寸測量方法	Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quat flat packs (QFP) (IEC 60191-6-3:2000); German version EN 60191-6-3:2000
DIN EN 60264-2-1-2004	繞組線的包裝.第2部分:圓柱形筒裝交貨線盤.基本尺寸	Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Basic dimensions (IEC 60264-2-1:1989 + A1:2003); German version EN 60264-2-1:1994 + A1:2003
DIN EN 60264-3-1-2004	繞組線的包裝.第3-1部分:圓錐形筒裝交貨線盤.基本尺寸	Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999 + A1:2003); German version EN 60264-3-1:2000 + A1:2003
DIN EN 60264-3-2-2000	繞組線的包裝.第3-2部分:圓錐形筒裝交貨線盤.熱塑材料可回收線盤規範	Packaging of windings wires - Part 3-2: Taper barrelled delivery spools; specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999); German version EN 60264-3-2:1999
DIN EN 60264-3-4-2000	繞組線包裝.第3-4部分:錐形筒式線盤.錐形線盤容器基本尺寸	Packaging of winding wires - Part 3-4: Taper barrelled delivery spools; basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999); German version EN 60264-3-4:1999
DIN EN 60264-5-1-2004	繞組線的包裝.第5-1部分:帶圓錐形側板的圓柱形筒裝交貨線盤.基本尺寸	Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997 + A1:2003); German version EN 60264-5-1:1997 + A1:2003
DIN EN 60264-5-2-2002	繞組線包裝.第5-2部分:圓錐形筒裝交貨線盤.熱塑可回收線盤規範	Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges; Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001); German version EN 60264-5-2:2001
DIN EN 60286-2-2003	自動裝運元件的包裝.第2部分:元件單向連續編帶包裝	Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (IEC 60286-2:1997 + A1:2002); German version EN 60286-2:1998 + A1:2003
DIN EN 60286-4-1998	自動搬運元器件的封裝.第4部分:把電子元器件用外殼包封在E型和G型包裝中的杆控自動送料裝置	Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997); German version EN 60286-4:1998
DIN EN 60286-5-2004	自動裝配用元件的包裝.第5部分:矩陣式料盤	Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:2003); German version EN 60286-5:2004
DIN EN 60286-6-2004	自動裝配用元件的包裝.第6部分:表面安裝元件的散裝盒包裝	Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:2004); German version EN 60286-6:2004
DIN EN 60317-44-1997	特種繞組線規範.第44部分:芳族聚醯亞胺包裝矩形銅線.240級	Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 (IEC 60317-44:1997); German version EN 60317-44:1997
DIN EN 61076-4-108-2002	電子設備連接器.第4-108部分:經品質評估的印製板連接器.符合 IEC 60917-1 的基本網格為 2.5mm 、具有 25mm	Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 (IEC 61076-4-108:2002); German version EN 61076-4-108:2002
DIN EN 61834-4-1999	錄製.家用的使用6,35mm磁帶螺旋掃描數位音像盒式磁帶錄影系統(525-60,625-50,1125-60和1250-50系統).第4部	Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents (IEC 61834-4:1998); German version EN 61834-4:1998
DIN EN 62090-2003	電子元器件產品條碼和二維符號包裝標籤	Product package labels for electronic components using bar code and two-dimensional symbologies (IEC 62090:2002); German version EN 62090:2003
DIN EN 62137-2005	環境和耐久性試驗.區域陣列式包裝件表面安裝板的試驗方法FBGA、BGA、FLGA、LGA、SON和QFN	Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN (IEC 62137:2004 + Corrigendum:2005); German version EN 62137:2004
DIN EN 62148-1-2003	光纖有源元件及器件.包裝和介面標準.第1部分:總則和指南 (IEC 62148-1:2002); 德文版本 EN 62148-1:2002	Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2002); German version EN 62148-1:2002
DIN EN 62148-10-2003	光纖有源元件及器件.包裝和介面標準.第10部分:SFF MU雙20針無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers (IEC 62148-10:2003); German version EN 62148-10:2003
DIN EN 62148-11-2004	纖維光學有源元件及器件.包裝和介面標準.第14部分:14針集成調製器鐳射二極體發射器	Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003
DIN EN 62148-12-2004	光纖有源元件及器件.包裝和介面標準.第12部分:帶同軸RF連接器的鐳射發射機	Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with coaxial RF connector (IEC 62148-12:2004); German version EN 62148-12:2004
DIN EN 62148-2-2003	光纖有源元件及器件.包裝和介面標準.第2部分:SFF MT-RJ 10針無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 2: SFF MT-RJ 10-pin transceivers (IEC 62148-2:2003); German version EN 62148-2:2003
DIN EN 62148-3-2003	光纖有源元件及器件.包裝和介面標準.第3部分:SFF MT-RJ 20針無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003); German version EN 62148-3:2003
DIN EN 62148-4-2004	纖維光學有源元件及器件.包裝和介面標準.第4部分:PN 1x9塑膠光纖無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003); German version EN 62148-4:2003
DIN EN 62148-5-2003	光纖有源元件及器件.包裝和介面標準.第5部分:SC 1x9光纖模數	Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic modules (IEC 62148-5:2003); German version EN 62148-5:2003
DIN EN 62148-6-2004	纖維光學有源元件及器件.包裝和介面標準.第6部分:ATM-PON無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003
DIN EN 62148-7-2003	纖維光學有源元件及器件.包裝和介面標準.第7部分:SFF LC 10針無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003); German version EN 62148-7:2003
DIN EN 62148-8-2003	光纖有源元件及器件.包裝和介面標準.第8部分:SFF LC 20針無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers (IEC 62148-8:2003); German version EN 62148-8:2003
DIN EN 62148-9-2003	光纖有源元件及器件.包裝和介面標準.第9部分:SFF MU雙10針無線電收發信機	Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers (IEC 62148-9:2003); German version EN 62148-9:2003
DIN EN 76-1979	某些預包裝食品的包裝.玻璃和金屬包裝容器的容量	Packages for certain prepacked foodstuffs; capacities of glass and metal containers
DIN EN 862-2006	包裝.防止兒童打開的包裝.非藥物用不可再封閉的包裝要求和試驗過程.德文版本EN 862-2005	Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2005
DIN EN 868-10-2000	要進行消毒的醫療器械系統和包裝材料.第9部分:用於生產可熱密封的袋、卷軸和蓋子的聚烯烴塗膠非織物材料.要	Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and test methods; German version EN 868-10:2000
DIN EN 868-2-1999	計畫進行消毒醫療裝置的包裝材料和包裝系統.第2部分:消毒包裝.要求和檢驗方法	Packaging materials and systems for medical devices which are be sterilized - Part 2: Sterilization wrap; requirements and test methods; German version EN 868-2:1999
DIN EN 868-3-1999	計畫進行消毒醫療裝置的包裝材料和包裝系統.第3部分:生產紙袋用的紙(EN 868-4中的規定)和生產穿孔帶紙和卷	Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5); requirements and test methods; German version EN 868-3:1999
DIN EN 868-4-1999	計畫進行消毒的醫療裝置用的包裝材料和包裝系統.第4部分:紙袋.要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags; requirements and test methods; German version EN 868-4:1999
DIN EN 868-5-2002	消毒醫療設備用包裝材料和設備.第5部分:紙和塑膠薄膜制熱封裝和自封裝袋和卷軸.要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction; Requirements and test methods; German version EN 868-5:1999 + AC:2001
DIN EN 868-6-1999	計畫進行消毒醫療產品的包裝材料和包裝系統.第6部分:用環氧乙烷或射線進行消毒時使用的醫藥包裝品生產用的	Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-6:1999
DIN EN 868-7-1999	計畫進行消毒醫療裝置的包裝材料和包裝系統.第7部分:用環氧乙烷或射線方法進行消毒時使用的可熱密封的醫藥	Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-7:1999
DIN EN 868-8-1999	計畫進行消毒醫療裝置的包裝材料和包裝系統.第8部分:符合EN 285的蒸氣消毒器的可重複使用的消毒罐.要求和試	Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285; requirements and test methods; German version EN 868-8:1999
DIN EN 868-9-2000	要消毒的醫療裝置系統和包裝材料.第9部分:用於生產可熱密封的袋,卷軸和蓋子的聚烯烴未塗覆非織物材料.要求	Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and tests methods; German version EN 868-9:2000
DIN EN ISO 10303-210-2002	工業自動化系統和集成.產品資料表示和資訊交換.第210部分:應用協定:電子元件、互連和包裝設計	Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnected and packaging design (ISO 10303-210:2001); German version EN ISO 10303-210:2002, text in English
DIN EN ISO 10442-2005	石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機	Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002); English version EN ISO 10442:2002
DIN EN ISO 11607-1 Berichtigung 1-2007	最終滅菌醫學設備的封裝.第1部分:原材料、無菌阻隔系統和包裝系統的要求	Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006); German version EN ISO 11607-1:2006, Corrigenda to DIN EN ISO 11607-1:2006-07
DIN EN ISO 11607-1-2006	終端無菌醫學設備的包裝.第1部分:原材料、消毒阻擋系統和包裝的要求(ISO 11607-1:2006)	Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) English version of DIN EN ISO 11607-1:2006-07
DIN EN ISO 11607-2-2006	最後滅菌的醫療器械的包裝.第2部分:組成、密封和裝配過程的確認和要求(ISO 11607-2:2006)	Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) English version of DIN EN ISO 11607-2:2006-07
DIN EN ISO 11683-1997	包裝.觸摸危險標記.要求	Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997); German version EN ISO 11683:1997
DIN EN ISO 11897-2001	包裝.熱塑軟薄膜制袋.折邊撕裂擴展試驗	Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999); German version EN ISO 11897:2001
DIN EN ISO 12048-2001	包裝.滿運輸包裝件.利用壓縮試驗機進行壓縮試驗和堆積試驗	Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000
DIN EN ISO 13355-2003	包裝.滿裝的運輸包裝和單元貨物.隨機垂直振動試驗	Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001); German version EN ISO 13355:2003
DIN EN ISO 15119-2004	包裝.袋.添裝袋的摩擦測定	Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000); German version EN ISO 15119:2004
DIN EN ISO 15378-2007	藥品的主要包裝材料.以良好加工實踐(GMP)為參考ISO 9001-2000應用的特殊要求	Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2006); German and English version EN ISO 15378:2007
DIN EN ISO 16101-2004	包裝.危險貨物的運輸包裝.塑膠的相容性試驗	Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004); German version EN ISO 16101:2004
DIN EN ISO 16103-2005	包裝.危險物品的運輸包裝.再迴圈的塑膠	Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005); German version EN ISO 16103:2005
DIN EN ISO 16104-2003	包裝.危險品的運輸包裝.試驗方法	Packaging - Transport packaging for dangerous goods - Tests methods (ISO 16104:2003); German version EN ISO 16104:2003
DIN EN ISO 16106-2006	包裝.危險貨品運輸包裝.危險貨物包裝、中間散貨容器(IBCs)和大型包裝.應用ISO 9001的指南	Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006); English version of DIN EN ISO 16106:2006-06
DIN EN ISO 16467-2003	包裝.危險物品的運輸包裝.IBCs試驗方法	Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003); German version EN ISO 16467:2003
DIN EN ISO 21898-2005	包裝.非危險貨物用軟的過渡性散貨集裝箱(FIBCs)	Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004); German version EN ISO 21898:2005
DIN EN ISO 2233-2001	包裝.滿運輸包裝和單位負載.試驗條件	Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000); German version EN ISO 2233:2001
DIN EN ISO 2234-2002	包裝.滿載的運輸包裝及成組裝運.使用靜載荷法堆積試驗 (ISO 2234:2000); 德文版本 EN ISO 2234:2002	Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000); German version EN ISO 2234:2002
DIN EN ISO 2244-2002	包裝.滿載的運輸包裝及成組裝運.水準衝擊試驗 (ISO 2244:2000); 德文版本 EN ISO 2244:2002	Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000); German version EN ISO 2244:2002
DIN EN ISO 2247-2002	包裝.滿載的運輸包裝及成組裝運.固定低頻率振動試驗 (ISO 2247:2000); 德文版本 EN ISO 2247:2002	Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000); German version EN ISO 2247:2002
DIN EN ISO 23667-2007	包裝.危險物品的運輸包裝.硬性塑膠和塑膠合成IBCs.相容性測試	Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007); German version EN ISO 23667:2007
DIN EN ISO 2873-2002	包裝.滿載的運輸包裝及成組裝運.低壓試驗 (ISO 2873:2000); 德文版本 EN ISO 2873:2002	Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000); German version EN ISO 2873:2002
DIN EN ISO 2875-2003	包裝.完整滿裝運輸包裝件和單元貨載.噴水試驗	Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000); German version EN ISO 2875:2002
DIN EN ISO 7711-1-1998	牙科旋轉器械.金剛鑽器具.第1部分:尺寸、要求、標記和包裝	Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998
DIN EN ISO 780-1999	包裝.貨物搬運用圖形標誌	Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999
DIN EN ISO 7965-2-1996	包裝.袋.跌落試驗.第2部分:柔性熱塑簿膜包裝袋	Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993); German version EN ISO 7965-2:1996
DIN EN ISO 801-3-1996	紙漿.成批銷售重量測定.第3部分:大宗包裝	Pulps - Determination of saleable mass in lots - Part 3: Unitized baled (ISO 801-3:1994); German version EN ISO 801-3:1996
DIN EN ISO 8317 Berichtigung 1-2005	防兒童拆開的包裝.可再次包裝件的要求和試驗程式	Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003); German version EN ISO 8317:2004, Corrigenda to DIN EN ISO 8317:2004-11; German version EN ISO 8317:2004/AC:2005
DIN EN ISO 8317-2004	防兒童拆開的包裝.可再次包裝的要求和試驗程式	Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003); German version EN ISO 8317:2004
DIN EN ISO 8318-2002	包裝.滿載的運輸包裝及成組裝運.採用可變頻的正弦振動試驗 (ISO 8318:2000); 德文版本 EN ISO 8318:2002	Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000); German version EN ISO 8318:2002
DIN EN ISO 8351-1-1996	包裝.袋.分類方法.第1部分:紙袋	Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994); German version EN ISO 8351-1:1996
DIN EN ISO 8351-2-1996	包裝.袋.分類方法.第2部分:熱塑軟薄膜包裝袋	Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994); German version EN ISO 8351-2:1996
DIN EN ISO 8367-1-1996	包裝.普通包裝袋尺寸公差.第1部分:紙袋	Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993); German version EN ISO 8367-1:1996
DIN EN ISO 8367-2-1996	包裝.普通包裝袋尺寸公差.第2部分:熱塑薄膜袋	Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996
DIN ISO 10531-2000	包裝.滿裝的運輸包裝.單元貨物穩定性試驗	Packaging - Complete, filled transport packages - Stability testing of unit loads (ISO 10531:1992)
DIN ISO 8115-3-1997	大包.第3部分:棉花包.包裝和標籤	Bales - Part 3: Bales of cotton, packaging and labelling (ISO 8115-3:1995)
DIN-Fachbericht CEN/TR 14520-2007	包裝.再利用.再利用系統性能評價方法	Packaging - Reuse - Methods for assessing the performance of a reuse system; German version CEN/TR 14520:2007
編號	中文名稱	英文名稱