歐洲包裝標準(EN packing standards)

歐洲包裝標準(EN packing standards)

編號	中文名稱	英文名稱
CR 12340-1996	包裝材料 對包裝系統進行壽命週期盤點分析的建議	Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems
CR 13504-2000	包裝材料 材料回收 回收材料最小含量標準	Packaging - Material recovery - Criteria for a minimum content of recycled material
CR 13686-2001	包裝材料 來自包裝廢棄物的能源回收的最佳化	Packaging - Optimization of energy recovery from packaging waste
CR 13688-2000	包裝材料 材料重複利用 避免持續阻礙重複利用的物資和材料的需求報告	Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
CR 13695-1-2000	包裝材料 關於測量和驗證四種重金屬和其它危險物資存在於包裝材料中並向環境釋放的要求 第1部分：關於測	Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging
CR 13695-2-2002	包裝材料 關於測量和驗證四種重金屬和其它危險物資存在於包裝材料中並向環境釋放的要求 第2部分：關於測	Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa
CR 13910-2000	包裝材料 包裝材料壽命週期分析標準和方法學報告	Packaging - Report on criteria and methodologies for life cycle analysis of packaging
CR 14311-2002	包裝材料 標誌和材料識別系統	Packaging - Marking and material identification system
CR 14376-2002	粘合劑 紙和板、包裝材料和一次性衛生產品用粘合劑 粘合過程的描述和評估	Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process
EN 1086-1995	食品運輸袋 袋型選擇和涉及包裝物內袋的推薦規範	Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed
EN 12246-1999	平板架和包裝用木材的品質分級	Quality classification of timber used in pallets and packaging
EN 12248-1999	工業包裝用鋸材　允許偏差和最佳尺寸	Sawn timber used in industrial packaging - Permitted deviations and preferential sizes
EN 12374-1998	包裝　軟管　術語	Packaging - Flexible tubes - Terminology
EN 12375-1998	包裝　軟鋁管　壁厚測定方法	Packaging - Flexible aluminium tubes - Wall thickness determination method
EN 12377-1998	包裝　軟管　封閉氣密性的試驗方法	Packaging - Flexible tubes - Test method for the airtightness of closures
EN 12702-2000	紙、紙板包裝和易處置衛生品用粘合劑　潛在膠粘層的阻塞的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers
EN 12703-1999	紙、紙板、包裝和易處置衛生品用粘合劑　低溫柔韌性和冷裂開溫度的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
EN 12704-1999	紙、紙板、包裝和易處置衛生品用粘合劑　含水膠粘劑起泡性的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives
EN 12726-2000	包裝　軟木塞和回頭明顯的瓶口用口徑為18.5mm的塞軟木塞的瓶口	Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and temper evident capsules
EN 12960-2001	紙和紙板、包裝及一次性衛生產品用粘合劑 抗剪切力的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
EN 13010-2003	包裝 單件包裝 顯示板的尺寸和要求	Packaging - Unit packaging - Dimensions and requirements for pegboard display
EN 13025-2000	包裝 輕薄金屬包裝 標稱填充容積最大可達40000毫升的圓、柱形和錐形通用金屬容器	Packaging - Light gauge metal packaging - Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
EN 13026-2001	包裝 輕薄金屬包裝 標稱填充容積最大可達30000毫升的非圓、柱形和錐形通用金屬容器	Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml
EN 13027-2001	包裝 輕薄金屬包裝 根據標稱毛帶蓋容積確定的頂部開口圓罐	Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
EN 13028-2001	包裝 輕薄金屬包裝 根據標稱填充容積確定的加或不加氣飲品用頂部開口圓罐	Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes
EN 13029-2001	包裝 輕薄金屬包裝 插入式塑膠封閉開口	Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
EN 13045-2000	包裝 撓性柱形塑膠管 尺寸和公差	Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
EN 13046-2000	包裝 撓性柱形金屬管 尺寸和公差	Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances
EN 13047-2000	包裝 撓性錐形金屬管 尺寸和公差	Packaging - Flexible conical metallic tubes - Dimensions and tolerances
EN 13048-2000	包裝 撓性鋁管 內部漆膜厚度測量法	Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
EN 13054-2001	包裝 全填充運輸包裝 測定包裝重心的試驗方法	Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package
EN 13117-1-2000	運輸包裝 可再用剛性塑膠分配箱 第1部分：一般應用	Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application
EN 13117-2-2000	運輸包裝 可再用剛性塑膠分配箱 第2部分：通用測試規範	Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing
EN 13193-2000	包裝 包裝和環境 術語	Packaging - Packaging and the environment - Terminology
EN 13199-1-2000	包裝 小負荷搬運系統 第1部分：普通要求和試驗方法	Packaging - Small load carrier systems - Part 1: Common requirements and test methods
EN 13199-2-2000	包裝 小負荷搬運系統 第2部分：柱狀堆疊系統（CSS）	Packaging - Small load carrier systems - Part 2: Column Stackable System (CSS)
EN 13199-3-2000	包裝 小負荷搬運系統 第3部分：捆綁堆疊系統	Packaging - Small load carrier systems - Part 3: Bond Stackable System (BSS)
EN 13246-2001	包裝 拉伸鋼帶規範	Packaging - Specification for tensional steel strapping
EN 13247-2001	包裝 載荷提升、捆綁和固定用拉伸鋼帶規範	Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads
EN 13393-2001	包裝 邊緣保護器規範	Packaging - Specification for edge protectors
EN 13394-2001	包裝 非金屬拉伸帶規範	Packaging - Specification for non-metallic tensional strapping
EN 13427-2000	包裝 包裝和包裝廢物領域中採用歐洲標準的要求	Packaging - Requirements for the use of European standards in the field of packaging and packaging waste
EN 13428-2000	包裝 製造和合成的特殊要求 防止資源減少	Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
EN 13429-2000	包裝 再生	Packaging - Reuse
EN 13430-2000	包裝 以材料重複利用的方式回收的包裝的要求	Packaging - Requirements for packaging recoverable by material recycling
EN 13431-2000	包裝 以能量再生的方式回收的包裝的要求，包括最小熱值規範	Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
EN 13432-2000	包裝 通過複合和降解而回收的包裝的要求 包裝終驗試驗大綱和評估標準	Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
EN 13437-2003	包裝和材料再生 再生方法準則 再生過程描述和流程圖	Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart
EN 13439-2003	包裝 能量回收率 定義和計算方法	Packaging - Rate of energy recovery - Definition and method of calculation
EN 13440-2003	包裝 再生率 定義和計算方法	Packaging - Rate of recycling - Definition and method of calculation
EN 13461-2001	包裝 圓柱撓性層壓管 尺寸和公差	Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
EN 13538-3-2002	羽絨製品 睡袋幾何特性的測定 第3部分：重載下的體積和易包裝性	Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing
EN 13590-2003	包裝 用於各種零售物品運輸的柔性運輸袋 容積和承載力的一般特性和試驗方法的測定	Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
EN 13593-2003	包裝 收集家庭廢物用紙袋 類型、要求和試驗方法	Packaging - Paper sacks for household waste collection - Types, requirements and test methods
EN 13626-2003	包裝 箱平板架 通用要求和試驗方法	Packaging - Box paletts - General requirements and test methods
EN 13628-1-2002	包裝 撓性包裝材料 用靜態淨空氣相色譜法測定殘餘溶劑 第1部分：絕對法	Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
EN 13628-2-2002	包裝 撓性包裝材料 用靜態淨空氣相色譜法測定殘餘溶劑 第2部分：工業方法	Packaging - Flexible packaging material; Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
EN 13920-14-2003	鋁和鋁合金 廢料 第14部分：消費品鋁包裝生產的廢料	Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings
EN 13920-15-2003	鋁和鋁合金 廢料 第15部分：消費品鋁包裝產生的去塗層鋁廢料	Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
EN 14045-2003	包裝　在特定堆放條件下包裝材料定向試驗中的分解的評定	Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
EN 14046-2003	包裝　在可控堆肥條件下包裝材料極限有氧生物降解性的評估　二氧化碳釋放的分析方法	Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide
EN 14047-2002	包裝　在水介質中包裝材料極限有氧生物降解性的測定　釋放二氧化碳的分析方法	Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
EN 14048-2002	包裝　在水介質中包裝材料極限有氧生物降解性的測定　用閉式呼吸測定計測量需氧量的方法	Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
EN 14053-2003	包裝　由波紋或實心纖維板製造的包裝材料　型號和結構	Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction
EN 14054-2003	包裝　紙和紙板包裝　紙箱設計	Packaging - Paper and paperboard packaging - Design of cartons
EN 14149-2003	包裝 裝滿的運輸包裝和單荷載　用旋轉跌落法進行的衝擊試驗	Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop
EN 14182-2002	包裝 術語 基本術語和定義	Packaging - Terminology - Basic terms and definitions
EN 1719-1998	紙和紙板、包裝材料和一次性衛生製品用粘合劑 壓力敏感粘合劑粘著力的測定 環行粘著力的測定	Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack
EN 1720-1998	紙和紙板 包裝和一次性用衛生製品用粘合劑 分散性的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability
EN 1721-1998	紙和紙板、包裝材料和一次性衛生產品用粘合劑 壓敏粘合劑表面粘性的測量 滾球粘著力的測定	Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack
EN 1895-2001	紙和紙板、包裝材料和一次性衛生製品用粘合劑 撓性對撓性組裝件的180 °"T"剝離試驗	Adhesives for paper and board, packaging and disposable sanitary products - 180°- "T" peel test for a flexible-to-flexible assembly
EN 1896-2001	紙和紙板、包裝材料和一次性衛生製品用粘合劑 抗拉伸強度和伸張度的測定	Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
EN 22206-1992	包裝 滿裝運輸包裝 試驗時包裝件的標識	Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987)
EN 22248-1992	包裝 滿裝運輸包裝 跌落垂直衝擊試驗	Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985)
EN 22876-1992	包裝 滿裝的運輸包裝 滾動試驗	Packaging; complete, filled transport packages; rolling test (ISO 2876:1985)
EN 23-1-1978	洗滌粉和清潔粉的包裝 纖維板硬紙盒和圓筒的尺寸和體積	Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board
EN 24178-1992	滿裝的運輸包裝 分類檢驗 記錄的資訊	Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980)
EN 24180-1-1992	滿裝的運輸包裝 性能計畫編制的一般規則 第1部分：一般原則	Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980)
EN 24180-2-1992	滿裝的運輸包裝 性能計畫編制的一般規則 第2部分：定量的資料	Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980)
EN 26590-1-1992	包裝 袋 名詞和種類 第1部分：紙袋	Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983)
EN 26590-2-1992	包裝 袋 名詞和種類 第2部分：熱塑柔性薄膜袋	Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986)
EN 26591-1-1992	包裝 袋 測量的方法和說明 第1部分：.空紙袋	Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984)
EN 26591-2-1992	包裝 袋 測量的方法和說明 第2部分：.熱塑柔性薄膜空袋	Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
EN 26599-1-1992	包裝 袋 試驗的條件 第1部分：紙袋	Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983)
EN 27023-1992	包裝 袋 空紙袋檢驗抽樣方法	Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983)
EN 27965-1-1992	包裝 袋 跌落試驗 第1部分：紙袋	Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984)
EN 28317-1992	防止兒童拆開的包裝 可再次包裝的要求和試驗程式	Child-resistant packaging; requirements and testing procedures for reclosable packages (ISO 8317:1989)
EN 28474-1992	包裝 滿裝的運輸包裝 浸水試驗	Packaging; complete, filled transport packages; water immersion test (ISO 8474:1986)
EN 28768-1992	包裝 滿裝的運輸包裝 倒侄塌試驗	Packaging; complete, filled transport packages; toppling test (ISO 8768:1986)
EN 29454-1-1993	軟釺焊劑 分類和要求 第1部分：.分類、標記和包裝	Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990)
EN 415-1-2000	包裝機械安全 第1部分：包裝機械及相關設備的術語和分類	Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-2-1999	包裝機械安全 第2部分：預成型剛性容器包裝機械	Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
EN 415-3-1999	包裝機械安全 第3部分：成型、填充和密封機械	Safety of packaging machines - Part 3: Form, fill and seal machines
EN 415-4-1997+AC-2002	包裝機械安全 第4部分：貨盤裝載器和貨盤卸載器	Safety of packaging machines - Part 4: Palletisers and depalletisers
EN 60264-1-1994	繞組線的包裝　第1部分：圓繞組線容器	Packaging of winding wires - Part 1: Containers for round winding wires (IEC 60264-1:1968)
EN 60264-2-1-1994	繞組線的包裝　第2部分：圓柱形筒裝交貨線盤　第1節：基本尺寸	Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 1: Basic dimensions (IEC 60264-2-1:1989)
EN 60264-2-2-1994	繞組線的包裝　第2部分：圓柱形筒裝交貨線盤　第2節：熱塑性材料可回收線盤規範	Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for returnable spools made from thermoplastic material (IEC 60264-2-2:1990)
EN 60264-2-2/prA1-2003	繞組線的包裝　第2部分：圓柱形筒裝交貨線盤　第2節：熱塑性材料可回收線盤規範 修改prA1	Amendment 1 to IEC 60264-2-2: Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools; Specification for returnable spools made from thermoplastic material
EN 60264-2-3-1994	繞組線的包裝　第2部分：圓柱形筒裝交貨線盤　第3節：熱塑性材料不可回收線盤規範	Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-2-3:1990)
EN 60264-2-3/prA1-2003	繞組線的包裝　第2部分：圓柱形筒裝交貨線盤　第3節：熱塑性材料不可回收線盤規範　修改prA1	Amendment 1 to IEC 60264-2-3: Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material
EN 60264-3-1-2000	繞組線的包裝　第3-1部分：圓錐形筒裝交貨線盤　基本尺寸	Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999)
EN 60264-3-2-1999	繞組線的包裝　第3-2部分：圓錐形筒裝交貨線盤　熱塑性材料可回收線盤規範	Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999)
EN 60264-3-3-1994	繞組線的包裝　第3部分：圓錐形筒裝交貨線盤　第3節：熱塑性材料不可回收線盤規範	Packaging of winding wires - Part 3: Taper barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-3-3:1990)
EN 60264-3-3/prA1-2003	繞組線的包裝　第3部分：圓錐形筒裝交貨線盤　第3節：熱塑性材料不可回收線盤規範　修改prA1	Amendment 1 to IEC 60264-3-3: Packaging of winding wires - Part 3-3: Taper barrelled delivery spools; Specification for non-returnable spools made from thermoplastic material
EN 60264-3-4-1999	繞組線的包裝　第3-4部分：圓錐形筒裝交貨線盤　圓錐形筒裝交貨線盤容器的基本尺寸	Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999)
EN 60264-3-5-1999	繞組線的包裝　第3-5部分：圓錐形筒裝交貨線盤　熱塑性材料線盤線筒規範	Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999)
EN 60264-4-1-1994	繞組線的包裝　第4-1部分：試驗方法　熱塑性材料交貨線盤	Packaging of winding wires - Part 4: Methods of test - Section 1: Delivery spools made from thermoplastic material (IEC 60264-4-1:1989)
EN 60264-4-1/prA1-1997	繞組線的包裝　第4-1部分：試驗方法　熱塑性材料交貨線盤　修改prA1	Amendment to IEC 60264-4-1: Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
EN 60264-4-2-1994	繞組線的包裝　第4-2部分：試驗方法　熱塑性材料錐形筒裝交貨線盤容器	Packaging of windig wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992)
EN 60264-4-2/prA1-2003	繞組線的包裝　第4-2部分：試驗方法　熱塑性材料錐形筒裝交貨線盤容器　修改prA1	Amendment 1 to IEC 60264-4-2: Packaging of winding wires - Part 4-2: Methods of test; Containers made from thermoplastic material for taper barrelled delivery spools
EN 60264-5-1-1997	繞組線的包裝　第5-1部分：帶圓錐形側板的圓柱形筒裝交貨線盤　基本尺寸	Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997)
EN 60264-5-2-2001	繞組線的包裝　第5-2部分：帶圓錐形側板的圓柱形筒裝交貨線盤熱塑材料制可回收線盤規範	Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001)
EN 60286-1-1998	自動裝配用元件的包裝　第1部分：具有軸向引線的元件在連續編帶上的帶式包裝	Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:1997)
EN 60286-2-1998+A1-2003	自動裝配用元件的包裝　第2部分：具有單向引線的元件在連續編帶上的帶式包裝	Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (IEC 60286-2:1997)
EN 60286-3-1998	自動裝配用元件的包裝　第3部分:表面安裝的元件在連續編帶上的包裝	Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:1997)
EN 60286-4-1998	自動裝配用元件的包裝　第4部分:封裝在E和G型包裝件中的電子元件用的粘著料斗	Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997)
EN 60286-5-1997	自動裝配用元件的包裝　第5部分：矩陣式料盤	Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:1995, modified)
EN 60286-6-1998	自動裝配用元件的包裝　第6部分：表面安裝元件的散裝盒包裝	Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:1998)
EN 61834-4-1998	錄製　使用者用6.35mm磁帶(525-60、625-50、1125-60和1250-50系統)的螺旋掃描數位視訊盒式錄影系統　第4部分	Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents (IEC 61834-4:1998)
EN 62090-2003	使用條碼和二維符號表示的電子元件的產品包裝標籤	Product package labels for electronic components using bar code and two-dimensional symbologies (IEC 62090:2002)
EN 62148-1-2002	光纖有源元件和器件　包裝和介面標準　第1部分：總則和指南	Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2002)
EN 62148-10-2003	光纖有源元件和器件　包裝和介面標準　第10部分： SFF MU雙向20針式收發機	Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers (IEC 62148-10:2003) / Note: Endorsement notice
EN 62148-2-2003	光纖有源元件和器件　包裝和介面標準　第2部分： SFF MT-RJ 10針式收發機	Fibre optic active components and devices - Package and interface standards - Part 2: SFF MT-RJ 10-pin transceivers (IEC 62148-2:2003) / Note: Endorsement notice
EN 62148-3-2003	光纖有源元件和器件　包裝和介面標準　第3部分：SFF MT-RJ 20針式收發機	Fibre optic active components and devices - Package and interface standards - Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003) / Note: Endorsement notice
EN 62148-4-2003	光纖有源元件和器件　包裝和介面標準　第4部分：PN 1X 9 塑膠光纖收發機	Fibre optic active components and devices - Package and interface standards - Part 4: PN 1*9 plastic optical fibre transceivers (IEC 62148-4:2003) / Note: Endorsement notice
EN 62148-5-2003	光纖有源元件和器件　包裝和介面標準　第5部分：SC 1X 9 光纖元件	Fibre optic active components and devices - Package and interface standards - Part 5: SC 1*9 fibre optic modules (IEC 62148-5:2003) / Note: Endorsement notice
EN 62148-7-2003	光纖有源元件和器件　包裝和介面標準　第7部分： SFF LC 10針式收發機	Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003) / Note: Endorsement notice
EN 62148-8-2003	光纖有源元件和器件　包裝和介面標準　第8部分： SFF LC 20針式收發機	Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers (IEC 62148-8:2003) / Note: Endorsement notice
EN 62148-9-2003	光纖有源元件和器件　包裝和介面標準　第9部分： SFF MU 10針式收發機	Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers (IEC 62148-9:2003) / Note: Endorsement notice
EN 76-1978	某些預包裝食品的包裝 玻璃和金屬容器的容量	Packages for certain prepacked foodstuffs; capacities of glass and metal containers
EN 829-1996	玻璃試管內的診斷系統 醫學和生物試樣的傳送包裝 要求、試驗	In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, tests
EN 862-2001	包裝 防兒童拆開的包裝 非藥物產品用不能再封包的包裝的要求和試驗程式/注：不包括2001年9月的修改通知	Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products / Note: Includes Correction Notice of September 2001
EN 868-1-1997	經消毒的醫療器械用包裝材料和系統 第1部分：一般要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 1: General requirements and test methods
EN 868-10-2000	經消毒的醫療器械用包裝材料和系統 第10部分：生產熱密封袋、卷軸和蓋的聚烯烴粘性塗層非編織材料 要求和	Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
EN 868-2-1999	經消毒的醫療器械用包裝材料和系統 第2部分：消毒包裹物 要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 2: Sterilization wrap - Requirements and test methods
EN 868-3-1999	經消毒的醫療器械用包裝材料和系統 第3部分：生產紙袋（EN 868-4規定）和生產盒和捲筒用紙（EN 868-5規定	Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
EN 868-4-1999	經消毒的醫療器械用包裝材料和系統 第4部分：紙袋 要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags - Requirements and test methods
EN 868-5-1999+AC-2001	經消毒的醫療器械用包裝材料和系統 第5部分：紙、塑膠薄膜結構的熱和可自密封袋及卷軸 要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
EN 868-6-1999	經消毒的醫療器械用包裝材料和系統 第6部分：生產經氧化乙烯或輻照消毒的醫用包所用的紙 要求和試驗方法	Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
EN 868-7-1999	經消毒的醫療器械用包裝材料和系統 第7部分：生產經氧化乙烯或輻射消毒的醫用熱密封包所用的粘性塗覆紙	Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods
EN 868-8-1999	經消毒的醫療器械用包裝材料和系統 第8部分：符合EN 285的蒸汽消毒器用可重複使用的消毒容器 要求和試驗	Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
EN 868-9-2000	經消毒的醫療器械用包裝材料和系統 第9部分：生產熱密封袋、卷軸和蓋的聚烯烴非塗層非編織材料 要求和試	Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
EN ISO 10303-210-2002	工業自動化系統和集成　產品資料表示和交換　第210部分：應用協定：電子配件、互連和包裝設備	Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001)
EN ISO 11683-1997	包裝　觸摸危險標誌　要求	Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997)
EN ISO 11897-2001	包裝　熱塑柔性薄膜袋　折邊處的撕裂擴展試驗	Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999)
EN ISO 12048-2000	包裝　滿裝的運輸包裝　使用壓力試驗機的壓力試驗和堆積試驗	Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)
EN ISO 13355-2003	包裝 滿裝運輸包裝和單件貨物 垂直隨機振動試驗	Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001)
EN ISO 16104-2003	包裝　危險貨物的運輸包裝　試驗方法	Packaging - Transport packaging for dangerous goods - Test methods (ISO 16104:2003)
EN ISO 16467-2003	包裝　危險貨物的運輸包裝　中型散裝貨物容器(IBCs)的試驗方法	Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003)
EN ISO 2062-1995	紡織品　從包裝抽取紗線　單端斷裂力和斷裂伸長的測定	Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993)
EN ISO 2233-2001	包裝　滿裝的運輸包裝和單元貨物　試驗條件	Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000)
EN ISO 2234-2002	包裝 滿裝運輸包裝和單件貨物 靜載荷法堆積試驗	Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000)
EN ISO 2244-2002	包裝 滿裝運輸包裝和單件貨物 水準衝擊試驗	Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000)
EN ISO 2247-2002	包裝 滿裝運輸包裝和單件貨物 固定低頻振動試驗	Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000)
EN ISO 2873-2002	包裝 滿裝運輸包裝和單件貨物 低壓試驗	Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000)
EN ISO 2875-2002	包裝 滿裝運輸包裝和單件貨物 噴水試驗	Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000)
EN ISO 7711-1-1998	牙科旋轉器械　金剛鑽器械　第1部分：尺寸、要求、標記和包裝	Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997)
EN ISO 780-1999	包裝　貨物搬運的圖形標誌	Packaging - Pictorial marking for handling of goods (ISO 780:1997)
EN ISO 8318-2002	包裝 滿裝的運輸包裝和單元貨物 用振動頻率作正弦振動試驗	Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)
EN ISO 8351-1-1996	包裝　袋的分類方法　第1部分：紙袋	Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)
EN ISO 8351-2-1996	包裝　袋的分類方法　第2部分：熱塑柔性薄膜袋	Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994)
EN ISO 8367-1-1996	包裝　一般用途包裝袋的尺寸公差　第1部分：紙袋	Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)
EN ISO 8367-2-1996	包裝　一般用途包裝袋的尺寸公差　第2部分：熱塑柔性薄膜袋	Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
prEN 12064-1996	木板　包裝用實心和波紋纖維板規範	Board - Specification of solid and corrugated fibreboard for packaging purposes
prEN 14287-2001	鋁及鋁合金 製造包裝及包裝部件用鋁材化學成分的特殊要求	Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
prEN 14375-2003	醫藥產品防止兒童打開的包裝 試驗和要求	Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
prEN 14391-2002	包裝 可活動鋁管 危險感覺警告	Packaging - Collapsible aluminium tubes - Tactile warnings of danger
prEN 14477-2002	包裝 柔性包裝材料 刺破力的測定 試驗方法	Packaging - Flexible packaging material - Determination of puncture resistance; Test methods
prEN 14479-2002	包裝 柔性包裝材料用動態液上氣相色譜法測定殘餘溶劑 絕對法	Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography; Absolute method
prEN 1732-1-1997	包裝 尺寸配合 第1部分：原則	Packaging - Dimensional coordination - Part 1: Principles
prEN 1732-2-1997	包裝 尺寸配合 第2部分：術語	Packaging - Dimensional coordination - Part 2: Terminology
prEN 1732-3-1997	包裝 尺寸配合 第3部分：規則和尺寸	Packaging - Dimensional coordination - Part 3: Rules and dimensions
prEN 23-1-1989	洗滌粉和清潔粉的包裝 纖維板硬紙盒和圓筒的尺寸和體積	Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board
prEN 365-2002	預防高空墜落的人身保護設備和其它保護設備 使用、維護、定期檢查、修理、標誌和包裝的一般要求	Personal protective equipment and other equipment for protection against falls from a height - General requirements for instructions for use, maintenance, periodical examination, repair, marking and packaging
prEN 60191-6-11-2002	半導體器件的機械標準化　第6-11部分：矩形小間距球狀排列（FBGA）的包裝設計指南	Mechanical standardization of semiconductor devices - Part 6-11: General design guidelines for rectangular Fine Pitch Ball Grid Array Packages (FBGA)
prEN 60264-4-1-1997	繞組線的包裝　第4-1部分：試驗方法　熱塑性材料交貨線盤	()
prEN 60286-6-2003	自動裝配用元件的包裝　第6部分：表面安裝元件的散裝盒包裝	IEC 60286-6: Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
prEN 6049-006-2001	航空航太系列　設備電纜　偏聚酸胺纖維保護套　第006部分：自動包裝保護套　易彎曲接線端裝置　產品標準	Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard
prEN 62137-2002	環境和耐久試驗　安裝條件下FBGA、BGA、FLGA、LGA、SON和QFN包裝的環境和耐久試驗方法	IEC 62137, Ed. 1: Environmental and endurance testing - Environmental and endurance test methods for FBGA, BGA, FLGA, LGA, SON and QFN package on mounting condition
prEN 62149-3-4-2000	包括混合器件的光纖通信分立/集成光電子半導體器件的基礎標準　第3-4部分：包裝介面標準　SC-SIP 9針光纖終	Basic standards for discrete/integrated optoelectronic semiconductor devices for fibre optic communications including hybrid devices - Part 3-4: Package interface standards; Interface standard for SC-SIP 9 pin fibre optic terminal device
prEN 76-1988	某些預包裝食品的包裝 玻璃和金屬容器的容量	Packages for certain pre-packed foodstuffs; capacities of glass and metal containers
prEN ISO 16101-1999	包裝　危險貨物的運輸包裝　塑膠緊密性試驗	Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO/DIS 16101:1999)
編號	中文名稱	英文名稱